Knitting Machine (282-SC)

1\Gauge
5G, 7G, 10G, 12G, 14G
2\knitting width
52"(132cm)
3\needle bed
Single needle and single flake assembled needdle bed, needles and flakes can be
Replaced when mangling.
4\carriage
Single carriage, double systems.

5\yarn carriers
2× 8 sets of yarn carriers on 4 double rails. Plating yarn carriers and intarsia
Yarncarriers are option settings.
6\knitting speed
255 levels of speed, ma× 1.2m/sec. Knitting speed varies according to gauge and knitting conditions.
7\stitch cam
255 steps of independent selections with slight adjustment on each section.
8\needle selection
Full jacquard selection via 6 sections of special solenoid actuators.

9\racking
Racking is controlled by sevo-motor, max 2-inch racking.
10\setup device
Stable takedown comb and special setup needles.
11\yarn cutter
Single-unit system include 1 yarn cutter and 2 yarn grippers(option setting).
12\cam system
Cam system combined 3-way technique. 3 technique selections for knitting(knit, tuck, niss). Simultaneous transferring, front or back, independent of craaiage direction.

13\main drive systmen
Driving with AC servo motor. Variable carriage strole according to knitting width.
14\top tensions
16 top tension device. One-touch easy threading. Large knots cause machine stop. Small knots cause slow speed.
15\Take-down device
Main roller/Sub roller: 255 levels of speed, torque-motor control, programmable control.
16\Sinker
Adjustable sinker at regular opening and elastic stale is controlled by a step motor.

17\stop motion
Stop automatically with signal and sound alarm when yarn break, knot, prsee of, needle break, over current, orllback, wrong racking, improper singer, needle collision, excessive yarn, piece count, etc.
18\Operation lamp
Green/normal operation; Yellow/normal stop; Red/abnormal stop.
19\Packing dimension
Length× Width× Height 3M× 1.1M× 1.8M
20\Weight
Net weight/ Gross weight 1060/1200 kg

21\data input
Input by flash disk
22\Pattern memory
4096× 4096
23\Memory capacity
2G
24\Display screen
LCD 10.4". Touch-monitor
25\Operation platform
Standard language is Chinese, paid language software is allowed(option setting).
26\Main power
3 phases AC 200V, 50/60Hz, Electricity consumption 1.8KVA

The catalogue is subject to be changed without notice due to improvement of the machine.